64 lines
1.5 KiB
C
64 lines
1.5 KiB
C
#include <kernel.h>
|
|
#include "serial.h"
|
|
|
|
void outb(int port, unsigned char data)
|
|
{
|
|
__asm__ __volatile__("outb %%al, %%dx" :: "a" (data),"d" (port));
|
|
}
|
|
|
|
unsigned char inb(int port)
|
|
{
|
|
unsigned char data = 0;
|
|
__asm__ __volatile__("inb %%dx, %%al" : "=a" (data) : "d" (port));
|
|
return data;
|
|
}
|
|
|
|
// COM1
|
|
#define PORT 0x3F8
|
|
|
|
int serial_init()
|
|
{
|
|
outb(PORT + 1, 0x00); // Disable all interrupts
|
|
outb(PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
|
|
outb(PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
|
|
outb(PORT + 1, 0x00); // (hi byte)
|
|
outb(PORT + 3, 0x03); // 8 bits, no parity, one stop bit
|
|
outb(PORT + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
|
|
outb(PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
|
|
outb(PORT + 4, 0x1E); // Set in loopback mode, test the serial chip
|
|
outb(PORT + 0, 0xAE); // Test serial chip (send byte 0xAE and check if serial returns same byte)
|
|
|
|
if (inb(PORT) != 0xAE)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
// Set normal operation mode
|
|
outb(PORT + 4, 0x0F);
|
|
|
|
DEBUG("serial initialized");
|
|
return 0;
|
|
}
|
|
|
|
static int is_transmit_empty()
|
|
{
|
|
return inb(PORT + 5) & 0x20;
|
|
}
|
|
|
|
// Serial kernel putchar
|
|
void skputc(char c)
|
|
{
|
|
while (!is_transmit_empty()); // wait for free spot
|
|
outb(PORT, c);
|
|
}
|
|
|
|
// Serial kernel putstring
|
|
void skputs(const char* str)
|
|
{
|
|
unsigned int i=0;
|
|
while (str[i])
|
|
{
|
|
skputc(str[i]);
|
|
i++;
|
|
}
|
|
} |